LEKTRI.CO

The charging current that can be set from the dashboard is limited by the maximum current set at the installation of the charger. This value can be changed ...

All 1P7K Chargers have an integrated 6mA DC leak protection module. L22 chargers can be ordered with or without an integrated DC protection module. For thos...

The charger must be connected to a dedicated electrical circuit with the following protections: residual current device with a tripping current I∆n=30...

GREEN fading in and out: available and connected to Wi-Fi. GREEN continuously lit: available and unused (not connected to the electric vehicle). BLU...

A local WiFi connection is not mandatory but highly recommended. The charger can be used to charge and can be controlled locally with the app without a loca...

The set charging current exceeds the capacity of your electrical installation. Consult with an authorized electrical and lower the maximum charging current ...

If the charger’s LED are purple, authorization to start the charging session is needed. Use an RFID Tag, the mobile app or the Lektri.co charging platform t...

The set charging current represents the maximum allowed charging current. The car may decide to charge with a lower current if needed. This usually happens...

Any EV that complies with the ISO61851 standard can be charged using Lektri.co chargers.

The IP address can be found in your router’s interface or by using a networking app. We like using the “Fing” app, available for both iOS and Android.